Product characteristics
- Standard bellow with six shafts, optionally bellow with four shafts
- Torques from 0,1 to15 Nm
- Bore diameter from 2 to25 mm
- Tmax.= 100 °C
- Design 1.1 without keyway with setscrew
- Design 2.5, double slotted clamping hub, without keyway
- Hubs are glued to the bellow
- Hubs made from aluminium
- This series was designed for the drive of shaft encoders
- Measuring and control systems, stepping motors, etc.
|
Coupling description
TOOLFLEX® is a metal bellow-type coupling, a coupling system which has proven its worth in the field in many cases. The metal bellow compensates perfectly for axial, radial and angular displacements.
At the same time its geometric shape allows for high torsional stiffness and a low mass moment of inertia. TOOLFLEX® is produced in eleven sizes for maximum torques up to 340 Nm.
General description
Subject to its well-approved joint procedure a non-positive connection of the aluminium hubs with the multilayer bellows made from stainless steel is produced.
The flanged insert connection sizes 20 to 45 ensures a torque transmission of every single bellow layer. Since Toolflex is a metal coupling, it remains fatigue-endurable in the high temperature range up to a maximum of 200 °C.
Moreover, it is resistant to influences of media or critical operating conditions, respectively
