TANK HEATER TYPE EHP

Product characteristics
  • Inserted heating cartridges with temperature control
  • By external or internal setting(TA/ TI)
  • Thermostat to be set to 0 °C - 85 °C, 16 ampere
  • Horizontal assembly of the heating cartridges
  • Changing of the ceramic cartridges without oil drain possible
  • Screw-in thread G 1 1/2”, G2
Tank heater type EH
tankh_eh_t_182x156
Product characteristics
  • Inserted heating cartridges with temperature control
  • By external or internal setting (TA / TI)
  • Thermostat to be set to 0 °C - 85 °C, 16 ampere
  • Horizontal assembly of the heating cartridges
  • Screw-in thread G 1 1/2”, G2
Tank heater type TEHM
182x156_tehm
Product characteristics
  • Tank heater with magnetic clamp
  • For direct assembly in the oil tank
  • To be mounted horizontally to the tank ground
  • Or vertically to the tank wall
  • By means of the magnetic clamp
  • Controling by means of an installed thermostat
  • With preset cut-in or cut-off temperatrue, respectively
  • The tank heater is most suitable to retrofit machines
  • The connection cable can easily be directed to the outside
  • Oil drain and welding of a drain plug is not necessary