MINEX®-S SIZES SA 22/4 TO SB 60/8
The coupling consists of an external and an internal rotor. The external rotor has high-quality, permanent magnets of changing polarity on the inner side and the internal rotor has them on the outside. The external rotor is normally fixed on the drive side and the magnets are glued in the keyways. The magnets of the driven-sided internal rotor are cylindrically ground to ensure a minimal air gap and encapsulated through a magnetic cover that is impervious to fluids. In their non-operative states the north and south poles of the rotors are opposite to each other and the magnetic field is completely symmetric. It is only when the rotors are twisted that the magnetic field lines are moved, hence the torque is transmitted through the air gap. Then there is a synchronous operation under a constant torsion angle. If the maximum coupling torque and the maximum torsion angle are exceeded, the power transmission is interrupted. Thus the MINEX®-S offers an overload protection function of the drive train. After removing the cause of the overload (e. g. damage to the bearing, blocking of the internal rotor) both rotors can be synchronised again and operation is resumed.Sealing function
The main component of the MINEX®-S is the containment shroud that is fixed to the driven-sided power unit and separates internal and external rotor from each other. It ensures a low-vibration torque transmission working without mechanical connection and guarantees a completely leak-proof separation of product and atmosphere. The sealing is achieved with a flat seal or an o-ring, thus eliminating the need to dynamically load the sealing elements. The containment shroud and internal rotor are generally made from stainless steel 1.4571 or Hastelloy. The magnets of the internal rotor are encapsulated to make them impervious to fluids and thus protected against external influences. Since the containment shroud is a stationary component with a rotating magnetic field, it causes losses of eddy current. In order to keep these low, the containment shroud is also available in Hastelloy from size 75 upwards ensuring a higher electrical resistance than stainless steel. If eddy current losses can definitely be excluded, alternative materials like PEEK or ceramics may be chose. Explosion-proof use
MINEX®-S couplings are suitable for the power transmission in drives that are used in hazardous areas. As a component of the device class II the couplings are assessed and confirmed for the use in explosive areas of category 2G according to the EU standards 94/9/EC (ATEX 95). Please see our website www.ktr.com for advice, copies of certification and operating/mounting instructions.