13
Sep

RADEX®-NC DK

Product characteristics
  • Double cardanic design
  • Compensates axial, angular and parallel misalignmet
  • Aluminium clamping hubs
  • Disc packs made from stainless spring steel
  • Aluminium spacer
Coupling description The RADEX®-NC is a line particularly developed for the servo technology. In this coupling a package of torsionally rigid steel laminae that are soft in bending ensures a reliable compensation for axial, angular and radial shaft displacements. As all-metal coupling - the laminae are made from stainless steel - the RADEX®-NC can even be used with high temperatures (up to 200 °C) and under aggressive ambient conditions. The RADEX®-NC is manufactured in 6 sizes from size 5 to 35 for max. torques of up to 200 Nm. The hubs are frictionally engaged clamping hubs made from aluminium (size 42 made from steel) and are thus backlash-free even in a reversing drive.
Application
A typical application of the RADEX®-NC are backlash-free worm gear pairs with low transmissions. The rigidity of the coupling must be converted by reason of the transmission of the gearbox from the drive side to the driven side. Here the transmission itself has a decisive influence because it is squarely included in the calculation. This converted rigidity is added in line to the gearbox stiffness in order to get the total rigidity. In case of transmissions that are lower than i = 8 we recommend to use the RADEX®-NC due to the loss of rigidity of the total system if flexible couplings are used.
Explosion protection use
ex-log_5
RADEX®-NC couplings are suitable for power transmission in drives in hazardous areas. The couplings are certified and confirmed according to EC standard 94/9/EC (ATEX 95) as units of category 2G/2D and thus suitable for the use in hazardous areas of zone 1, 2, 21 and 22. Please read through our information included in the respective Type Examination Certificate and the operating and mounting instructions

Popular Posts